聚醚砜超滤膜接枝聚乙烯醇-氨基酸共聚物的亲水改性研究

基于聚合多巴胺的附着性及易与氨基(—NH2)等基团形成共价键的特性,本实验将聚合多巴胺作为对聚醚砜(PES)超滤膜进行表面改性的接枝中间物,将聚乙烯醇(PVA)-氨基酸共聚物接枝至PES膜表面,从而提高PES超滤膜的亲水性能.实验通过PVA与氨基酸的酯化反应形成PVA-氨基酸共聚物,将带有—NH2的共聚物与PES超滤膜表面的聚合多巴胺涂覆层形成共价键,从而将亲水的PVA-氨基酸共聚物接枝到疏水的超滤膜表面.实验利用通量的变化、红外光谱(FTIR)分析、表面接触角、场发射扫描电镜(FESEM)等手段来表征膜特征参数的变化,同时也考察了改性膜对油水乳化液的分离效率和抗污染能力.试验结果表明,经过PVA-氨基酸共聚物接枝改性的膜表面的亲水性有一定的提高,原膜接触角为91°,涂覆和接枝改性后的膜表面接触角分别为71°和53°,油水乳化液的分离实验显示,改性后的膜通量和清洗恢复率均有明显提高.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

低强度超声波强化SMBR处理中的超声波参数优化研究

研究了利用低强度超声波强化低温一体式膜生物反应器（SMBR）污水生物处理中最优超声波参数的选择。结果表明,功率密度为0.27 W/L、辐照时间为20 min时,超声波对低温SMBR中COD去除的强化效果最佳。SMBR对NH3-N去除效果达到最佳时,超声波功率密度和辐照时间分别为0.27 W/L和15 min。综合考虑,选择更有利于低温时NH3-N去除的超声波参数：功率密度0.27 W/L、辐照时间15 min。经此超声波处理后COD、NH3-N的强化效果在24 h均能保持,故可设置超声波处理的时间间隔为24 h。     

DOM纳滤膜污染及对膜截留卡马西平性能的影响

研究了天然原水中溶解性有机物(DOM)对HL和ESNA1-K两种纳滤膜造成的膜污染及其对膜截留卡马西平(CBZ)性能的影响.结果表明,DOM的存在造成了严重的膜污染和通量衰减.膜污染对CBZ截留率的影响与膜本身的特性和污染物特性有关,DOM通过在膜表面形成污染滤饼层和进入膜孔内部造成的膜孔堵塞,影响弱疏水性的CBZ从水中的分离,青草沙水库原水中的DOM引起的膜污染提高了两种纳滤膜对CBZ的截留效果,而太湖DOM造成的膜污染会降低CBZ的截留效果.研究还发现,中等相对分子质量(1 500~10 000)有机物会紧密地黏附在膜表面形成滤饼层,从而改变膜表面的疏水性能,小分子主要通过进入膜孔导致膜孔径堵塞.滤饼层的疏水性和浓差极化作用以及膜孔径的堵塞造成膜通量衰减并影响CBZ去除率.应用XDLVO理论对DOM造成的膜污染的分析结果表明,太湖DOM的疏水性明显强于青草沙DOM,其分子间的聚合自由能更负,与膜的黏附自由能更负,因而造成的膜污染和通量衰减更严重.     

自养脱氮污泥的亚硝化活性恢复策略

为考察自养脱氮污泥亚硝化活性快速恢复的策略,在3个反应器内分别采用不同的方法对经过长期冷冻保存后的污泥进行了恢复活性的研究.其中R1为MBR(膜生物反应器),采用低ρ(DO)(0.30 mg/L)连续流恢复策略;R2为SBR(序批式反应器),采用低ρ(DO)(0.30 mg/L)间歇流恢复策略;R3为SBR,采用低ρ(NH₄+-N)预培养-高曝气-低ρ(DO)运行三阶段的恢复策略.结果表明,R1的恢复时间为46 d,NH₄+-N氧化速率达到4.99 mg/(h·g)(以N计),最终ρ(MLSS)达到5.43 g/L;R2的恢复时间为39 d,NH₄+-N氧化速率达到4.61 mg/(h·g),最终ρ(MLSS)达到4.47 g/L;R3的恢复时间为48 d,NH₄+-N氧化速率达到5.64 mg/(h·g),最终ρ(MLSS)达到5.16 g/L. 3个反应器均能长期抑制亚硝酸盐氧化细菌的活性,使亚硝化稳定运行. 3个反应器中,R3恢复所需时间最长,但污泥活性最好; R1中的污泥活性较低,但是膜组件有效截留了污泥,达到了最高的ρ(MLSS).研究显示,通过厌氧预培养后转为膜生物反应器连续流运行的策略,可有助于污泥的极大保留及污泥活性的最大恢复.      

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

膜污染层微生物与聚丙烯微滤膜间的界面作用及其吸附特征

采用热力学方法及界面吸附理论,对2株膜污染层微生物(Aeromonas veronii M4、Aeromonas caviae N25)与聚丙烯(PP)微滤膜间的界面作用及吸附特征进行研究.结果表明,Aeromonas veronii M4与PP膜表面均表现出明显的疏水性特征,而Aeromonas caviae N25则呈现亲水性特征,并且A.veronii M4的运动性能也要高于A.caviae N25;另外,2株细菌及PP膜的表面均带有负电荷,表现出明显的电子供体特征,而Lewis酸碱分量U_(mlb)~(AB)则在2株细菌与PP膜的界面作用能中占据着主导地位;依据XDLVO理论,A.caviae N25及A.veronii M4与PP膜之间的总界面作用能均为负值,表明二者在膜上的吸附是一个主动吸附过程,而A.veronii M4-PP膜之间的界面作用能负值最大,说明A.veronii M4具有较高的吸附能力;静态吸附结果则表明,A.veronii M4在PP膜上的吸附量要明显高于A.caviae N25,而2株菌在膜上的吸附行为可由准二级动力学模型进行描述.     

反渗透膜面细菌胞外多聚物提取方法研究

城市污水脱盐系统的反渗透(RO)膜面生物污堵问题严重影响了该技术的稳定运行,解析生物污堵机理的关键因素是微生物胞外多聚物(EPS)特征分析,然而目前细菌EPS提取方法多样,无统一标准,制约了EPS分析的可靠性和可对比性.基于此,本文以再生水厂RO膜面污堵物中分离的细菌为对象,采用水浴、超声、离子树脂、碱液4种方法提取EPS,以DOC和DNA含量表征提取的EPS总量和提取过程细胞破裂程度.结果表明,45℃水浴法不造成细胞破裂,提取总量多,是一种有效的提取方法.进一步对比不同提取时间条件下EPS溶液中多糖和蛋白含量变化,以及分子量、荧光特征等,综合认为提取1 h时,提取的EPS中多糖与蛋白相对含量稳定,不同分子量化合物均溶于水中,能客观地反映EPS特征.研究表明,45℃水浴1 h可以作为细菌EPS提取的适用方法应用.     

MDEA水溶液膜法天然气脱硫的试验研究

以新配和含有一定H_2S的MDEA溶液为吸收液,以聚偏氟乙烯(PVDF)膜组件为接触器,通过对操作参数的调节和改变膜孔大小等方法对脱硫率和总传质系数进行研究。结果表明:气液压力差以及膜孔孔径的增加均有利于脱硫率和总传质系数的提升,即均有利于脱硫。降低进气流量和低气液比均对H_2S传质有积极作用。